USED Gretsch Gretsch / G6119 Tennessee Rose [20]

The "6119 Tennessee Rose" was introduced in 1958.
It was first released as "6119 Tennessee Rose" and later changed its name to "6119 Tennessee Rose".
This model has been loved by many musicians since its release, and is the pride of Gretsch's steadfast popularity.
The 16-inch archtop body with full hollowbody construction is equipped with "Filter-Tron" humbucking pickups developed by "Ray Butts" to produce "the Gretsch sound" with a delicate but not too thin treble range and a warm but not too thick midrange and bass. The strings have been cleaned and replaced after arrival at our store.

* The strings have been cleaned, replaced, rods adjusted, octave adjusted, string height adjusted, rubbed together, and nut replaced since we received it, so it is in good playing condition.
The original bridge was bent, so both the bridge and bridge base have been replaced with new ones.
The strap pins have been replaced. Pick guard is missing.
There are many scratches on the neck joint, and there are some minor dents and scratches on the entire surface including the back of the neck.
There is a signature (unknown) written on the hard case that comes with the guitar.

Item rank: B+ (Good)

Year of manufacture: Made in 2001
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine original bridge assembly
Country of Origin ： JAPAN
Weight ： 3.80kg
Serial ： 013119-3086

Truss rod: No problem, confirmed to be 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|-
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon nut replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
43.0mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut replacement